Tips for ABINIT users and developers - OBSOLETE!

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How to install ABINIT on Mac OSX ======

<HTML><br></HTML>
//This manpage is available as ~abinit_src_dir/README.MacOSX//

\\ \\
<HTML><hr></HTML>
===== Using Homebrew package manager =====
<HTML><br></HTML>

//A Homebrew formula for ABINIT is available (authors: D. Davydov + M. Torrent).//
\\ \\
//Tested with mac OS X v10.9 (Mavericks), v10.10 (Yosemite), 10.11 (El Capitan).\\
Homebrew is available at [[http://brew.sh|brew.sh]]//

==== Prerequesites ====

  * Homebrew installed (see this [[http://brew.sh/#install|manual]])

  * Notes:
    * Homebrew needs ''%%Xcode%%'' and ''%%Xcode command line tools%%'' to be installed;\\ just type: ''%%xcode-select --install%%''

==== Installing ABINIT ====

  * Just type:<code>
brew install homebrew/science/abinit</code>

  * ABINIT should install smoothly... with its dependencies.

==== Comments ====

  * At the first installation, this can take time, because of the required compilation of some dependencies (''%%netCDF%%'', ''%%fftw%%'' ...).

  * ''%%LibXC%%'', ''%%ETSF_IO%%'' and ''%%netCDF%%'' fallbacks (plugins) are used by default.\\ ''%%FoX%%'', ''%%Wannier90%%'' and ''%%BigDFT%%'' are not available in Homebrew.\\ ''%%AtomPAW%%'' can be installed as a separate package (formula).


  * The following options are available for ABINIT formula:
    * ''%%--with-testsuite%%''\\ Run full test suite (time consuming) \\
    * ''%%--without-check%%''\\ Skip build-time tests (not recommended) \\
    * ''%%--without-etsf_io%%''\\ Build without etsf_io support \\
    * ''%%--without-netcdf%%''\\ Build without netcdf support \\
    * ''%%--without-fftw%%''\\ Build without fftw support \\
    * ''%%--without-gsl%%''\\ Build without gsl support \\
    * ''%%--without-scalapack%%'' \\ Build without scalapack support


\\ \\
<HTML><hr></HTML>
===== Using MacPorts package manager =====
<HTML><br></HTML>

//Available from ABINIT v7.4.3 \\
Tested with mac OS X v10.8 (Mountain Lion), v10.9 (Mavericks), v10.10 (Yosemite).\\
MacPorts is available at [[http://www.macports.org|macports.org]].//

==== Prerequesites ====

  * MacPorts installed (see this [[https://www.macports.org/install.php|manual]])

  * Some basic ports already installed:
    * ''%%gcc%%'' (last version) with Fortran variant (Fortran compiler),
    * ''%%mpich%%'' or ''%%openmpi%%'' (MPI)

  * Before starting, it is preferable to update MacPorts system: <code>
sudo port selfupdate
sudo port upgrade outdated</code>

  * Notes:
    * It is recommended to completely reinstall MacPorts after a MacOS upgrade.
    * MacPorts needs ''%%Xcode%%'' and ''%%Xcode command line tools%%'' to be installed;\\ just type: ''%%xcode-select --install%%''

==== 1- Using official ABINIT port ====

  * There are available ports in the MacPorts system for some ABINIT versions.\\ They have been originally created by ABINIT developers, but it they are not necessarily maintained for all ABINIT versions.

  * Try first to install official ABINIT port: <code>
sudo port install abinit</code>

  * If the lastest ABINIT is successfully installed, it's OK for you.\\ If not, follow the procedure 2- below.


==== 2- Using ABINIT port from ftp.abinit.org ====

=== 2.a- Preparing your MacPorts installation ===

  * You need to create a local repository designed to receive local ports.\\ Let's name it ''%%LOCAL_REPOSITORY%%'' in the following. This might be: <code>
LOCAL_REPOSITORY=/Users/my_login/ports</code> or <code>
LOCAL_REPOSITORY=/opt/local/localports</code> Replace ''%%LOCAL_REPOSITORY%%'' by the correct string in the following...

  * Edit the file ''%%/opt/local/etc/macports/sources.conf%%'' (with administrator privileges) and add these two lines at the end:<code>
file://LOCAL_REPOSITORY
rsync://rsync.macports.org/release/ports [default]</code>

  * Create the directory: ''%%LOCAL_REPOSITORY/science/abinit%%''

=== 2.b- Installing ABINIT ===

  * Download the "//portfile//" corresponding to your ABINIT version and copy it in the ''%%LOCAL_REPOSITORY/science/abinit%%'' directory.\\ \\ The //portfile// for ABINIT vX.Y.Z is available at:\\ [[ftp://ftp.abinit.org/MacPorts|ftp://ftp.abinit.org/MacPorts]].

  * Untar the file in the local repository:<code>
cd LOCAL_REPOSITORY/science/abinit
tar -xvzf Portfile.tar.gz</code>

  * Update your local repository index:<code>
cd LOCAL_REPOSITORY
sudo portindex</code>

  * Install ABINIT port:<code>
sudo port install abinit @X.Y.Z</code>

==== ABINIT port variants ====

  * By default, ABINIT is installed with the following plugins/fallbacks:\\ ''%%libXC%%'', ''%%ETSF_IO%%'', ''%%Wannier90%%''

  * Linking ABINIT to ''%%FFTW3%%'' library:<code>
sudo port install abinit @X.Y.Z +fftw3</code>

  * Linking ABINIT to parallel Linear Algebra ''%%ScaLapack%%'':<code>
sudo port install abinit @X.Y.Z +scalapack</code>

  * Installing a multi-threaded (''%%openMP%%'') version of ABINIT:<code>
sudo port install abinit @X.Y.Z +threads</code>

  * Installing ''%%atompaw%%'' PAW atomic dataset generator:<code>
sudo port install abinit @X.Y.Z +atompaw</code> or <code>
sudo port install atompaw</code>

  * It is possible to mix all previous variants:<code>
sudo port install abinit @X.Y.Z +fftw3+scalapack+threads+atompaw</code>

  * Other options available by typing:<code>
port info abinit</code>


\\ \\
<HTML><hr></HTML>
===== Compiling ABINIT by yourself under Mac OSX =====
<HTML><br></HTML>


==== Prerequesites ====

  * ''%%Mac OSX%%''

  * ''%%Xcode%%'' installed with ''%%Xcode command line tools%%'';\\ just type: ''%%xcode-select --install%%''

  * A Fortran compiler installed.\\ Possible options:
    * ''%%gfortran%%'' binary from: [[http://hpc.sourceforge.net|HPC sourceForge]]
    * g''%%fortran%%'' binary from: [[https://gcc.gnu.org/wiki/GFortranBinaries#MacOS|gnu.org]]
    * ''%%gfortran%%'' installed via a package manager (MacPorts, Homebrew, Fink)
    * ''%%Intel Fortran compiler%%''
    * ...

  * A MPI library installed (If you want to benefit from parallelism; recommended).\\ Possible options:
    * ''%%mpich%%'' from [[http://www.mpich.org|website]], or via a package manager
    * ''%%openmpi%%'' from [[http://www.open-mpi.org|website]], or via a package manager
    * ...

  * A Linear Algebra library installed.\\ By default the 'accelerate' Framework is installed on MacOSX and ABINIT build system should find it. \\ But you might want to install a parallel library: ''%%scalapack%%'', ''%%atlas%%'', ''%%mkl%%'', ...

==== Installing ABINIT ====

  * Create a working directory:<code>
cd abinit_src_dir
mkdir build && cd build</code>

  * Configure:
    * Sequential ABINIT:<code>
../configure FC=gfortran CC=clang FCFLAGS_EXTRA="-ffree-line-length-none"</code>
    * Parallel ABINIT (only with MPI installed):<code>
../configure FC=mpif90 CC=mpicc FCFLAGS_EXTRA="-ffree-line-length-none" \
             --enable-mpi  --enable-mpi-io</code>

  * Compile:<code>
make mj4</code>

  * Install (optional):<code>
make install</code>

==== Comments ====
  * To benefit from the "fallbacks" (''%%libXC%%'', ''%%netCDF%%'', ...), consult the configure script help:<code>
../configure --help</code> The ''%%--with-dft-flavor%%'' and ''%%--with-trio-flavor%%'' have to be adjusted.


\\ \\
\\ \\
<HTML><hr></HTML>
//Author: M. Torrent, April 2015, rev. Feb. 2016//