==== This file contains information about the use of spin-orbit for format pspcod=5 of pseudopotentials ==== 1) The line containing Haman grid parameters must be completed by an information about the spin-orbit format of the pseudopotential. So, one replaces 2.508991628593723E-4 0.0125 r1,al by 2.508991628593723E-4 0.0125 2 r1,al,pspso pspso is 1 for non spin-orbit (optional), 2 for spin-orbit 2) The lines describing the number of projectors and some of their characteristics must be duplicated, as soon as l/=0. The number of projectors must be 2. So, one replaces 0 0 0 1 2.76 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 1 0 0 1 3.91 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 2 0 0 1 1.57 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm by 0 0 0 1 2.76 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 1 0 0 2 3.91 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 1 0 0 2 3.91 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 2 0 0 2 1.57 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 2 0 0 2 1.57 l,e99.0,e99.9,nproj,rcpsp .00000000 .0000000000 .0000000000 .00000000 rms,ekb1,ekb2,epsatm 3) The pseudopotentials and pseudowavefunctions are then entered, in the order s, p1/2, p3/2, d3/2, d5/2, f5/2, f7/2. 4) The local potential is specified by lloc with the following values:\ lloc=0 refers to the s potential lloc=1 refers to the p3/2 potential lloc=2 refers to the d5/2 potential lloc=3 refers to the f7/2 potential lloc=-1 refers to the p1/2 potential lloc=-2 refers to the d3/2 potential lloc=-3 refers to the f5/2 potential